Upscaling Uncertainty Analysis in a Shallow Marine Environment.


Stephen K. D.1, Yang, C.1, Carter, J.N.2, Howell J.3, Manzocchi, T.4, Skorstad A.5

1 - Institute of Petroleum Engineering, Heriot-Watt University, Edinburgh EH9 9NX, UK.
2 - Department of Earth Science and Engineering, Imperial College, London SW7 2BP, UK.
3 - Department of Earth Sciences / Centre for Integrated Petroleum Research, University of Bergen, Allegt. N-5007 Bergen, Norway.
4 - Fault Analysis Group, School of Geological Sciences, University College Dublin, Belfield, Dublin.
5 - Norwegian Computing Centre, PO Box 114 Blindern, N-0314 Oslo, Norway.

Abstract - Geological models are often created at a scale finer than is suitable for flow simulation and also ignore the effects of sub-cellular heterogeneities. Upscaling of static and dynamic reservoir properties is an important process that captures the impact of smaller scales, ensuring that both heterogeneity and the flow physics are represented more accurately. A Geopseudo upscaling approach for shallow-marine reservoirs is presented, which captures the essential flow characteristics across a range of scales from laminae to the simulation grid. Starting with a base-case set of minimum assumptions enables generation of one set of pseudo-relative permeability and capillary pressure curves per facies. This is then expanded to investigate the limitations of these assumptions and compare their impact against variations in large-scale geological and structural parameters. For the analysis, two-level full factorial experimental design is used to determine important parameters. A comparison of upscaling effects is also performed.

The most important upscaling and fine-scale parameters identified by the analysis are the shape of the capillary pressure curve, lamina-scale permeability variation and upscaling flow speed. Of similar importance are the sedimentological parameters for shoreline aggradation angle and curvature. Fault direction (perpendicular and parallel to the shoreline) and the fine-scale upscaling method are of moderate to low importance. The shallow-marine parameter for clinoform barrier strength and the direction of flow considered when upscaling are unimportant. Analysis of upscaling effects suggests that the algorithm used at the intermediate scale is not important, while the assumed flow speed is very important, typically resulting in a 10% maximum variation in cumulative recovery. Fine-scale properties and upscaling methods affect recovery mostly due to increased initial water saturations but also because of early breakthrough.

Petroleum Geoscience, 14, 71-84.

Download pdf of article. This material has been published in Petroleum Geoscience, the only definitive repository of the content that has been certified and accepted after peer review. Copyright and all rights therein are retained by The Geological Society of London and EAGE. Petroleum Geoscience on-line